Dokio 1*100w Panneau solaire monocristallin rigide 100w pour maison/caravane/camping-car/bateau

Yes, this solar panel is designed to withstand harsh weather conditions. It has a waterproof design and a tough, sealed aluminum frame that is perfect for all weather conditions. The product also comes with a 25-year transferable power output warranty and a 10-year material and workmanship warranty.

Under good sunlight, it can support:

• 
  12V RV batteries
  
• 
  Lithium power stations
  
• 
  Small fridges
  
• 
  Fans, lights, small inverters
  
• 
  Emergency USB charging
  
• 
  RV trailer/boat 12V systems
  

Real output varies by sunlight and installation angle.

As recommended on the nameplate:

• 
  Minimum 12 AWG copper wire
  
• 
  Temperature rating ≥ 90°C

Yes:

• 
  Series → higher voltage (for 24V systems or large MPPTs)
  
• 
  Parallel → higher current (for 12V systems or cloudy conditions)
  

Always check your controller’s maximum PV voltage and current limits.

Yes, unless you are connecting to a portable power station.

For batteries:

• 
  12V systems: use a 20A+ PWM or MPPT controller
  
• 
  24V systems: use two panels in series + 20A+ MPPT controller
  

Portable power stations have a built-in solar controller, so no extra controller is needed.

Yes.

Just make sure your power station supports:

• 
  Solar input voltage up to 22.5V (Voc)
  
• 
  Solar current up to 11A
  

Most 200W–300W power stations can accept this panel directly using MC4 to XT60/Anderson adapters.

Yes.

This panel can work with almost all common battery chemistries as long as you use the correct solar charge controller:

Compatible battery types:

• 
  12V/24V Lead-acid (Flooded / AGM / Gel)
  
• 
  12V/24V LiFePO₄ (Lithium Iron Phosphate)
  
• 
  12V/24V Lithium-ion (with proper controller profile)
  
• 
  Portable power stations (Jackery, EcoFlow, Bluetti, Anker, etc.)
  

The panel is universal; the controller determines the charging profile.

Yes, but one panel is not enough.

A single panel (Vmp 18V) cannot charge a 24V battery.

For a 24V system, you need:

• 
  Two panels in series (Vmp ≈ 36V)
  
• 
  A 24V-compatible MPPT charge controller
  

This will safely charge a 24V lead-acid or LiFePO₄ battery.

Yes.

This panel is designed as a “12V nominal” solar panel with a Vmp of 18V, which is perfect for charging 12V batteries and 12V power stations through a solar charge controller.

Yes, this solar panel easy to install. The product is designed for simple mounting, and it comes with pre-drilled holes on the back of the panel to facilitate fast mounting and securing.

This solar panel is designed for high efficiency. It has a maximum power output of 200 Watts and is made of monocrystalline silicon, which is known for its high efficiency in converting sunlight to energy.